Rieka Hydraulic Lift for Batala

That is precisely what we specify against. up to 6 stops, 0.15–0.6 m/s, no overhead machine room, 1:2 or 2:1 roped hydraulic options. The Hydraulic Lift configuration is chosen after the engineer sees the building in Batala, because shaft width, headroom and pit depth vary more than any catalogue suggests.

For two to four stops in the foundry units and town houses common around Batala, hydraulic is usually the better fit: no machine room, lower headroom and a very smooth ride. Above four stops, or where running cost matters more, a gearless traction MRL wins. The engineer recommends one after seeing the building.

Yes. Rieka fabricates Hydraulic Lift structures, cabins and doors in-house, so shaft dimensions, door openings and finishes are built to your drawings rather than forced into a catalogue size. For the foundry units and town houses common in Batala, that flexibility usually decides the project.

Yes, and that is the main reason families in Batala install one. Rieka units have door-sensor edges, overload detection, emergency stop, intercom and ARD battery rescue. Controls sit at wheelchair height, and the cabin can be fitted with grab rails and a fold-down seat.

In Punjab, a Hydraulic Lift must comply with the National Building Code 2016 and the applicable state lift rules, with an inspection before commissioning. Rieka prepares the drawings, files the application and attends the inspection for every hydraulic lift project in Batala - you do not deal with the department.