scissor lift in Cuttack - Supply, Installation and Service

Once the shaft and pit civil work in Cuttack is ready, a standard scissor lift is erected, wired and load-tested in 10-15 working days. Projects involving structural changes to silver filigree workshops and dense town houses usually run 3-4 weeks. Rieka gives a dated schedule for your Scissor Lift at the time of the written quote, not after the advance.

Rieka specifies VFD drives on Scissor Lift units, which draw up to 40% less than older two-speed machines. For a typical Cuttack building the monthly running cost of a scissor lift is modest; the engineer calculates the actual figure for your stop count and usage pattern during the survey.

Yes. Mismatched dock and floor levels are the usual complaint in Cuttack warehouses. Rieka levels to within ±5 mm, and where the gap is at the truck bay we often recommend a scissor platform instead of a full shaft lift. The engineer advises on site.

Not necessarily. Hydraulic goods lifts need only a compact power-pack cabinet, which suits the silver filigree workshops and dense town houses around Cuttack where overhead space is committed to production. Traction units need headroom. Both options are assessed during the survey.

Overload sensing with audible alarm, safety gear and overspeed governor, slack-rope detection, final limit switches, an emergency stop at every landing in your Cuttack facility and interlocked doors that will not open mid-travel. For Cuttack facilities we also document everything for your safety audit.