goods lift Solutions for Haldwani

Yes. Mismatched dock and floor levels are the usual complaint in Haldwani warehouses. Rieka levels to within ±5 mm, and where the gap is at the truck bay we often recommend a scissor platform instead of a full shaft lift. The engineer advises on site.

Once the shaft and pit civil work in Haldwani is ready, a standard goods lift is erected, wired and load-tested in 10-15 working days. Projects involving structural changes to commercial buildings and town houses usually run 3-4 weeks. Rieka gives a dated schedule for your Goods Lift at the time of the written quote, not after the advance.

Every new goods lift installed in Haldwani carries a 24-month comprehensive warranty covering the machine, controller, doors and safety gear. Wear items follow their own schedule. Extended cover on your Goods Lift is available inside an AMC and is quoted upfront, not sprung later.

Yes, and goods lift retrofits are a large part of what we do in Haldwani, because most commercial buildings and town houses here were built before lifts were standard. The engineer checks load-bearing capacity, available shaft space and headroom, then proposes a configuration that fits - for a Goods Lift that often means a compact or pitless build.

Rieka specifies VFD drives on Goods Lift units, which draw up to 40% less than older two-speed machines. For a typical Haldwani building the monthly running cost of a goods lift is modest; the engineer calculates the actual figure for your stop count and usage pattern during the survey.