platform lift Solutions for Karnal

That is precisely what we specify against. 250–400 kg, 0.15 m/s, wheelchair platform 900×1400 mm, open or enclosed shaft. The Platform Lift configuration is chosen after the engineer sees the building in Karnal, because shaft width, headroom and pit depth vary more than any catalogue suggests.

Once the shaft and pit civil work in Karnal is ready, a standard platform lift is erected, wired and load-tested in 10-15 working days. Projects involving structural changes to HUDA sectors, kothis and research institute campuses usually run 3-4 weeks. Rieka gives a dated schedule for your Platform Lift at the time of the written quote, not after the advance.

An MRL puts a compact gearless machine inside the shaft, removing the overhead machine room - which in Karnal often decides whether the project is viable at all. For Karnal buildings constrained by municipal height limits or committed terrace space, that is often the deciding factor — and the gearless drive draws less power.

Yes, and platform lift retrofits are a large part of what we do in Karnal, because most HUDA sectors, kothis and research institute campuses here were built before lifts were standard. The engineer checks load-bearing capacity, available shaft space and headroom, then proposes a configuration that fits - for a Platform Lift that often means a compact or pitless build.

Yes. Rieka fabricates Platform Lift structures, cabins and doors in-house, so shaft dimensions, door openings and finishes are built to your drawings rather than forced into a catalogue size. For the HUDA sectors, kothis and research institute campuses common in Karnal, that flexibility usually decides the project.